Category Archives: Knots

neckerchief slide with wings

The Cure for the Fly Away Slide

neckerchief slide with wingsYouth groups that feature uniforms have some great attributes. A sense of belonging, the recognition that you are part of something special, a chance to be someone else for a short while. Young people love to get dressed up in uniforms. Don’t believe me? Just check out any picture of a brand new scout with their new uniform and see the excitement on their face. I once commented to a Cub Scout how good he looked in his new uniform. His response: “I know!”

BSA has a great selection of uniforms, and just this year (2015) they adopted a change in the uniform code that encourages wearing a neckerchief at Scout activities even when not in the dress uniform. This change better aligns the U.S. with the rest of the scouting world.

One of the drawbacks to the BSA uniform is the official neckerchief slide. These slides look great, and when you want your den or troop to look like a team, a common slide helps. But one downside to these slides is that they are a loose fit and often fly away during any robust activity. Anytime we had a game during a pack meeting that involved running, jumping, or similar high energy activities, I could be certain to find at least one wayward slide somewhere on the ground.

To help fix the problem of the Fly Away Neckerchief Slide, I’ve created a device that is simple to tie and attaches to the slide to help hold it in place. The instructions for how to tie your own are below.

Happy days!

WAS

Two lengths of paracord. One about 14", the other 20"

Two lengths of paracord. One about 14″, the other 20″

 We will start with two lengths of paracord. The smaller one will be about 14″ and will form the loop that will hold the slide in place. The other, longer cord, should be approximately 20″ or more. You will be cutting some of this longer piece of paracord away at the end of the project, but it makes tying the knot much easier. If you make your long piece long enough, you can use the left over scrap to create the ten cent youth awards.

Paracord is actually a little too thick for this project, but it does work. If you have a thinner cord, you might give it a try.

Fuse the ends of the cords to prevent unraveling.

Fuse the ends of the cords to prevent unraveling.

 If you have a nylon cord, fuse the ends to prevent the cord from unraveling.

Add an overhand knot to each end of the small piece of cord.

Add an overhand knot to each end of the small piece of cord.

 Tie an overhand knot into each end of the small piece of cord. This is going to help the cord from becoming undone as well as provide small handles to use for tightening the loop.

With both ends knotted, middle the cord.

With both ends knotted, middle the cord.

 After you have tied the knots in each end of the smaller cord, find the middle of the cord and then pull the two ends together to make a U shape. The part of the cord that bends to make the U is known as a bight in the world of knots.

Tie an overhand knot in the middle of the long cord and around the top in of the bight in the short cord.

Tie an overhand knot in the middle of the long cord and around the top  of the bight in the short cord.

 Take your longer cord and tie an overhand knot in the middle. Slip the longer cord’s knot over the bight you made in the shorter cord and cinch it down until it is snug. Not too tight because you will eventually want the smaller cord to be able to slide back and forth within the knots of the larger cord.

Now we start the series of knots that will hold the slide in place.

Now we start the series of knots that will hold the slide in place.

 Now we are gong to tie a short series of knots that will hold the cords onto the slide. Tying these knots together creates a Portuguese sennit (aka Solomon Bar) and is the basis for tying survival bracelets.

Start by taking the end of the cord on the right and crossing it back over the shorter cord as shown.

Complete the square knot .

Complete the square knot .

 Take the other end of the cord and bring it over the cord you just crossed in front of the smaller cord. Then pass it behind the smaller cord and up through opening made by the first cord and the smaller cord. It should look like the picture.

Cinch the knot down snug, but not too tight.

Cinch the knot down snug, but not too tight.

Pull on the two ends of the longer cord to snug the knot against the smaller cord. Remember, not too tight because we want the loop to be able to slide. You might recognize that we just tied a square knot over the smaller cord. That is just what we want, a series of square knots to fasten the cord to the neckerchief slide.

Make another knot like the last one. To keep tying square knots you need to always use the same end that you pass in front of the small cord. This end will alternate from side to side each time. So for this knot we will start with the end of the longer cord that is to the left and cross it over the smaller cord. The easiest way that I have seen to make sure I am starting with the right end is to always keep the longer cord ends aligned to the same side of the smaller cord. If you look you will notice that each longer cord end zig zags back and forth over the shorter cord. If you always keep the cord that passes above the smaller cord in front then you will end up with a good knot.

If you make a mistake and alternate where the cords pass, then the knot will twist. If you keep doing this you will make a spiral. We don’t want a spiral here, so if you start to get a twist, untie the cords and retie them in the correct orientation.

Make another knot similar to the first but switching direction.

Make another knot similar to the first but switching direction.

We complete the knot by snugging it down on to the cord.

Now we will add the slide to the knot by putting the short cord ends into the slide.

Now we will add the slide to the knot by putting the short cord ends into the slide.

Insert the ends of the smaller cord into the slide so that the loop is positioned at the top of the slide. We are going to continue our knot tying around the slide, so that the cord is attached to it.

Here is the first knot over the slide.

Here is the first knot over the slide.

 With the slide in place, tie your next knot just like you have been doing (make sure to use the correct leading cord in front). Snug the knot as shown. You cannot pull too tight here or the knot will want to slip behind the slide bar, so tighten just enough to create a nice knot shape. This is a little tricky, but you can do it.

Secure the cord to the slide by tying the next knot and thus completing the square knot.

Secure the cord to the slide by tying the next knot and thus completing the square knot.

 Make another knot, alternating the starting cord, and complete a square knot below the slide bar.

Add an additional knot to help shape the knot.

Add an additional knot to help shape the knot.

 Take one more pass at a knot over the smaller cord. This will establish the nice flat shape for the locking cord.

Trim and fuse the ends of the longer cord.

Trim and fuse the ends of the longer cord.

 Once you have all the knots in place, cut off the ends of the longer cord close to the knot and fuse them to keep them from unraveling. A little super glue can help hold the ends of the cord in place.

We now have a much more secure neckerchief slide.

Attach the neckerchief by first passing the ends through the loop from back to front.

Attach the neckerchief by first passing the ends through the loop from back to front.

 To use our new slide, first pass the neckerchief ends through the cord loop from back to front.

Next pass the neckerchief ends through the slide loop.

Next pass the neckerchief ends through the slide loop.

 Next pass the neckerchief through the back of the slide. This is now a tighter fit and helps hold the neckerchief in place.

Position the slide where you want it and tighten down the cord.

Position the slide where you want it and tighten down the cord.

 Move the slide up the neckerchief to where you want it to stay.

While holding the slide with one hand, pull on the knotted ends of the short cord with the other hand to tighten the loop at the top of the slide.

Your finished slide is going to do a much better job staying in position.

Your finished slide is going to do a much better job staying in position.

 Once you have tightened down the loop, the slide is on very securely. If you want to loosen it, just hold the slide with one and and pull on the cord loop with the other.

Many scouts just wear their neckerchiefs with the slide always locked in place. They just pull the neckerchief on and off over their heads.

Field Activity Magic – The Knot Bag

Whenever I have gone on an outing with youth that lasted more than a few hours, we have had periods of waiting. Often, we filled these ‘down times’ with stories, songs, and skits. I also found that these periods were a great chance to share new skills. Always wanting to be prepared for an opportunity, I started creating bags that would allow me to share new skills in an entertaining and constructive way. Some of these are just fun, others build on skills that your youth group might already teach. Most importantly, they give youth the opportunity to see that learning can be fun and share a sense of accomplishment.

I have several bags grouped into different categories, and I usually grab one to take along on a trip that allows me to teach, entertain, and connect with the youth. I rotate the bags from time to time based on my own interests but also how the youth responded the last time I brought a bag along. Two other bags that I take are Fire Starting, which includes materials for a number of different fire starting techniques, and Carving, which has wood blanks, knives, and sharpening equipment to teach that many more useful things than a sharp stick can be made with a pocket knife. Other bags that you could possibly share might be magic, games, sewing, leather craft, basketry, painting, drawing, and pottery. The list is only limited by your own interests and imagination.

Today I wanted to focus and share one of these bags: The Knot Bag.

Warning: Learning fancy knots and making projects can be addictive. Signs that you may have a problem include: 1) no longer looking at the TV at night but listening to programs as if they were radio plays, 2) your friends start calling you a knot head, and you like it, 3) you start to lurk in knotting related web sites looking for new challenges. There is no known cure.

 

My knot bag liberated from my wife.

My knot bag liberated from my wife.

 This is my knot bag. I liberated the bag from my wife, who received it at a work conference. (It’s okay, she has done the same with some bags that I was given at conferences.)

It works very well for a quick grab of materials for knot projects.

Three pockets allow for a little organization of your materials and tools.

Knot Bag - Top Pouch

Knot Bag – Top Pouch

 I use the smaller top pocket just for the thinnest cotton twine and some whipping cord as well. I run a small piece of twine outside of the bag and then zip it closed. This allows me to pull some twine out, cut it off and use it without needing to open and search through the bag for what I want.

The front pouch holds some tools and supplies.

The front pouch holds some tools and supplies.

 The front pouch is reserved for various supplies and some tools that do not fit into my knot tool kit.

The main compartment of the knot bag contains my various cords, tool kit, and other supplies too large to fit into the smaller pockets.

The main compartment of the knot bag contains my various cords, tool kit, and other supplies too large to fit into the smaller pockets.

 The main compartment holds the knot materials like paracord, satin rattail, and other types of cord. I keep my smaller tools together in a little kit bag inside this pouch as well.

Cords in various sizes and color combinations to allow for creation of unique projects.

Cords in various sizes and color combinations to allow for creation of unique projects.

 I bring along various cords so that there is a good size and color available depending on the project. Most of the time we use paracord for projects (it is very popular right now), but other projects call for different materials. Sunglasses keeper cords, for example, work better with a thinner cord. Cotton twine is old school, so if you want to share how sailors would have made knot projects, this is the cord to use.

I pick up my cords at various sources. I usually look for sales and then get a supply to last for a while. One of the best places I have found for paracord and other rope types is R&W Rope in New Bedford, MA. They do a great job getting the rope to you, and if you sign up for their mailing list you will hear about some good rope specials from time to time. I have also had good luck with cord shipped directly from Amazon, but be careful with vendors that ship directly, I have had both good and bad experiences.

If you are interested in going the traditional route, I can recommend Marty Combs. He has cotton cord for sale that is high quality (meets his standards) and had in the past offered discounts to scout groups. Might also help other youth groups out as well; you will need to contact him for details.

Various tools used for making knots

Various tools used for making knots

 A collection of tools is useful too. Some I have made, some are re-purposed for knot use, and some are designed specifically for tying knots. In the picture from upper left clockwise are:

  • Cylinders for tying Turk’s Head knots
  • Marlin Spikes (or Fids) used to help tighten the knot work
  • A Monkey’s Fist jig to aid in tying that knot
  • A small bag to store the knot kit
  • A clay stylus also helpful in tightening knots
  • Hemostats used to pull cord through some tight spaces
  • A lighter for fusing nylon cord ends to keep them from fraying
  • Wire cutters for cutting the cord. A knife or scissors could also be used.

Some supplies used to help create knot based projects.

Some supplies used to help create knot-based projects.

 I also have a collection of knot supplies that can be utilized for the projects.

  • Nite-Ize S-biners are helpful for lanyards and keychains
  • Inexpensive flashlights can be decorated with knots. This helps people know which light is theirs when they otherwise all look the same
  • Lanyard clasps from trade shows. I cut the from these off and save them for use with knotted lanyard projects
  • Lanyard hooks like the ones that I used for the ten cent youth award zipper pulls
  • Plastic buckles for bracelets and watchbands
  • Split rings for key chains
  • Bottle stoppers
  • Scunci hair bands for a one-size-fits-all bracelet
  • Marbles to fill the center of a Monkey’s Fist knot. I use these to create a Matinee Cowboy Lariat for the jumping rope knot trick

Some of the things that can be made using knots.

Some of the things that can be made using knots.

 I also keep in the bag some of the things that I have tied in the past to share as examples for what may be possible.

  • Eyeglass or Sunglass keeper cord
  • Lighter decoration
  • Flashlight decoration
  • Water bottle bangle for identification
  • Lanyard for a hemostat (for identification and to keep it from falling out)
  • Bell rope pulls
  • Survival Bracelets
  • Zipper pulls
  • Lanyards
  • Matinee Cowboy Lariats

A group of books that I take along to help provide inspiration and instruction. Paracord Outdoor Gear, Creative Ropecraft, Knot Craft, Knotting Matters Magazine.

Some of the books I take along to help provide inspiration and instruction.

 I like to bring along some resources for project ideas and instructions on how to make some of the knots needed. Here are some of my favorites, mostly because they focus on finished projects rather than just the knots themselves.

  • Creative Ropecraft by Stuart Grainger is the exception to the project rule. While it does have a few projects in the back of the book, it is most useful as a reference book for various knots, splices, and braids (known as sennits in the knot world)
  • Des Pawson’s Knot Craft features a lot of sea type projects, but has a number of other useful items to make as well.
  • If you become a member of the International Guild of Knot Tyers, you automatically receive issues of the magazine, Knotting Matters. These can be useful resources for different project ideas. They have given away free membership to youth organizations who are willing to teach knotting skills. See their web site for more details.
  • I just found this copy of Paracord Outdoor Gear Projects by Joel Hooks at my local scout shop and could not resist buying it. If I had to limit myself to one resource to bring along, I think this one would be it. It has some very useful projects, and covers just enough of the knots that you need to make the projects in the book.

An old scout 40 knot card

An old scout 40 knot card

 While not useful when you are in the field, these sites can also offer you some insight into possible rope projects:

  • Fusion Knots. J.D. Lenzen can be credited with creating a new generation of knot tyers with his Youtube videos, website, and project books.
  • Stormdrane’s Blog. David Hopper runs a fun site that has several knot projects along with a bunch of other things that often involve paracord.
  • Frayed Knot Arts. Vince Brennan does custom-made rope work but also features a library of projects and how to make them.

I hope you begin to start making your own ‘Go To’ project bags that you can use to share and teach new things to the youth you lead.

As always, we welcome your feedback on this post.

Cheers,

WAS

Hiking on the trail

Turning a Hike into an Adventure

“How far have we gone?” “How many more miles before we get there?” “Do we know where we are going?”

We have all heard these statements, along with the inevitable “Are we there yet?”,  when taking youth on a wilderness camp or even a day hike. This is a fun project that you can do with your group during a meeting prior to the outing as a hike preparation activity. The youth can be working on making Ranger Beads while you, or the hike leader, talks about other ways to prepare for the trip. When you are on the hike and someone wants to know when, where, or what is going on, you can refer them to their Ranger Beads for the answer.

Ranger Beads are pace count beads that help you track the number of paces you take while walking or hiking to your destination. This is a very old technique used to measure distance. Roman soldiers were said to use beads to keep track of how far they marched. In Rudyard Kipling’s book Kim, the young boy Kim is asked to watch what the enemy does and report to the British troops anything he finds out. He is taught how to measure the distance he has walked by using knots tied in a piece of rope.

If you know the length of your stride and are tracking the number of strides (or paces) you are taking with your Ranger Beads, then you will know how far you have gone, just like Kim.

This tutorial shows an easy way to make your own set of Ranger Beads.

 

 IMG_6669 To begin, each person needs about fifteen inches of paracord (parachute cord or “550” cord) and twelve beads. Wooden beads seem to work best because they are more difficult to break than glass or plastic beads. The hole in the beads should be just big enough for the paracord to pass through, but still be snug enough so that the bead will stay put when you move it. I used Bead Landing™ Wood Beads, Natural  available at Michael’s Crafts to make the Ranger Beads in this guide. Tools that you will need include something to cut the cord (scissors, knife, wire cutters, etc.) and a lighter (or matches) for fusing. These can be shared.
First step is pulling the core nylon strands out of the paracord. If your beads have a smaller hole, like mine did, the first step is to pull the core nylon strands out of the paracord. This step is required when using the Bead Landing™ Wood Beads because the hole is too small to allow the full paracord to pass through. By removing the inner core it allows the beads to fit on snugly. Test the cord on your beads for the proper fit. The bead should be able to slide up and down the cord when you pull it, but stay in position when left alone.
 With the core removed, we now need to fuse the ends. With the core removed, we now need to fuse the ends. We fuse the ends of the cord to keep the individual threads from unraveling and ruining our project.
Start the bowline loop. Now that both ends are fused, we’ll create a bowline knot at one end of the cord. The loop of the bowline knot should be just big enough to fit your thumb in. I like to start by putting the cord across my hand and then pinching with the forefinger and thumb of my other hand where I want the knot to be. 
 Rotate the right hand to make a loop in the cord. Now rotate the hand that is pinching the cord clockwise to make a loop in the cord.
 hold where the cord crosses itself with your thumb. Hold the cord with your thumb where it crosses itself.
 Feed the end of the cord through the loop that you made. Feed the end of the cord through the loop that you made.
 Take the cord around the back. Take the end of the cord around the back of the long piece above the loop.
 Then feed the cord back down through the loop. Then feed the cord back down through the loop.
 Adjust the knot so that just a little of the end of the cord is exposed and your thumb will just fit in the loop. Adjust the knot so that just a little of the end of the cord is exposed and your thumb will just fit in the loop.
 Finished Bowline knot. This is what the finished bowline knot should look like.
Adding beads Now that the bowline loop is in place, you can begin adding beads. This is a little hard because, as we already said, the holes in the bead need to be small enough so that the bead stays in position when moved on the cord. The small hole makes pushing the cord through a bit difficult. I found that if I twist the bead with one hand while trying to push the cord through with the other, eventually enough cord will emerge on the other side of the bead for me to grab and pull through.
 Distance beads Keep adding beads until you have five beads on the cord. These will represent distance markers and each bead will track one half mile. (If you want to measure Kilometers “Klicks”, then put on four beads as I have done here. Miles are more convenient in the U.S., but most of the rest of the world uses Kilometers.) I like to use different colored beads for the two parts of the Ranger Beads, but it is not necessary.
 Adding the separator knot. Now we will add the separator knot. This knot keeps our distance beads separate from our pace beads (which go on next). I like to use a figure-eight knot here rather than an overhand knot because it is a little bit thicker and looks nicer. Start the knot by crossing the free end back over the cord near the beads, making a loop.
 Figure eight knot. Next, wrap the free end behind the cord, but keep the loop in place.
 Finish the figure eight knot Finish the figure-eight knot by running the free end back through the loop.
 Cinch the knot up near the beads. Cinch the knot up near the beads, but make sure to leave some room, two or three bead lengths, so that the beads can be moved away from each other.
 Add the pace beads. Add seven pace beads (nine if you are using kilometers) just like you added the distance beads.
Finished Ranger Beads. Finish the Ranger Beads by adding another figure-eight knot at the end after you have strung all the pace beads.

How to use your new Ranger Beads

First, each person needs to determine his or her pace count. To do this, you must know how many strides you will take to cover 110 yards. A stride is the length your foot travels while you walk. To measure your stride, start walking with one foot and then count how many times the other foot takes a step. For example, if you started walking with your left foot, you would add one to your count every time your right foot touched the ground. (110 yards is 1/16th of a mile).

Next you need to count this for a specific distance: 110 yards. The easiest way to do this is to go to a local football field and have your group members count their stride from goal line to goal line, then multiply each stride count by 1.1 to determine their stride for 110 yards. This is the pace count that they want to remember for measuring the 110-yard distance.

Measuring distance with your Ranger Beads

Bead measuring one 110 yard distanceTo measure distance with your ranger beads you keep track of your strides as your walk or hike. Set your Ranger Beads to the initial position with every bead moved to the top (closest to the loop). Every time your count matches the stride count you determined was your number for 110 yards, you move a pace bead (one of the seven) from the top to the bottom of the pace section of the cord. This tracks every 16th mile that your have covered. Start your count over again, and move a bead each time you reach your pace count number.

When you have moved all seven of the pace count beads, don’t stop. Keep counting until you reach your pace count for the 110-yard distance an eighth time. Now you can move all the pace count beads back to the top and move one distance bead down. You have just walked 1/2 mile.

Continue this way to measure how far you have traveled. Remember that when you move the last distance bead down, you keep counting until it would be time to move another distance bead. Then you reset everything back to the top and you have now covered three miles (assuming you put a fifth bead in the distance group.)

This works the same way for kilometers, but you need to have nine pace beads and, typically, four distance beads. Once you know your stride count for 1/10 of a kilometer, every time you hit that count you move a pace bead down. When you have moved all nine you continue counting your stride (just like with the mile beads) and when you get your 1/10 kilometer stride count number, you move a distance bead down. You have now covered one kilometer. A configuration of four distance beads and 9 pace beads will allow you to measure five kilometers before starting over from the initial position.

Now that you have your Ranger Beads and have determined how to measure distance with them, it’s time to put them to good use. Take the group out on a hike and have them measure how far they hiked. If you know the distance beforehand, you can have small prizes for those that measure closest to the actual distance.

Understanding and awareness of distance and how far you have traveled are good skills for anyone to know. Ranger Beads are a fun way of helping grow that skill in youth.

Generic Expensive Awards

The Ten Cent Zipper Pull Youth Award

As a youth leader I like to find ways to encourage children when they do things that align with the values of the youth organization. If a teacher tells me that one of the girls in my group was very helpful in her class, or if a boy participates in a community cleanup drive, I like to acknowledge these things publicly. It helps reinforce the values that you may be trying to instill, and encourages others to emulate the same activity.

For a long time I would just bring the child forward and announce what they had done and why it was a good thing. Then we would all cheer wildly (we never clap politely in any youth meetings I run). I realized after a while that I could do better. One night I was making some keychain fobs from paracord and had some leftover pieces. I turned these scrap pieces into zipper pulls and thought, “You know, I can make these very quickly with hardly any expense. I wonder if they would be good as encouragement youth awards?” At the next meeting I experimented with not only cheering for the child, but also giving them a zipper pull to wear on their coat, backpack, sleeping bag, or anything else. These were a big hit. Everyone wanted the zipper pull youth award. It became a status symbol in the group. Several of the children, who received more than one pull, started wearing then on the same zipper to show off their awards as a collection.

Zipper pulls can be made in a number of ways. I will show you a simple technique that will you to make zipper pulls for less than 10 cents each. They cost even less if you buy your materials in bulk or use leftover scraps as I have done.

Things you will need to make these zipper pulls: scissors, lanyard hooks, lighter (or matches), 6-8" length of cord or string.

Scissors, lanyard hooks, lighter (or matches), 6-8″ length of cord or string.

To get started you will need:

  • Inexpensive lanyard hooks. I get a package of 45 of these at Michael’s.
  • Scissors.
  • 6-8 inches of cord.
  • A lighter or matches to fuse the nylon paracord, or some glue to keep the ends of the cord from fraying.

You may want to start with a longer piece of cord for your first few pulls until you become comfortable with the tying steps.

Start by forming the cord into a U shape.

Start by forming the cord into a U shape.

Start by forming your cord into a U shape. Hold two ends together and find the middle of the cord with your other hand and pull to create the U.

First loop.

Create the first loop by moving the end of the cord to the left, down, and back over the rest of the cord.

We start tying the zipper pull by taking the end of the cord on the left side of the U and moving it left, then down, then back to the right until it lays on top of the rest of the cord, leaving a loop to the left of the U.

Making the second loop by reversing the process with the first loop.

Create the second loop moving the right-side cord to the right, down, and behind the rest of the cord, then up through the first loop.

Next we take the cord on the right side and move it right, then down over the cord from the left, then behind what is left of the U, and finally through the loop we created on the left-hand side. When you have done these two loops your cord should look like the picture, with a small U at the bottom, left and right loops with the cord ends going through them in opposite directions, one from above and one from behind.

Cinch the first knot tightly.

Pull the loop and cord ends to cinch the first knot somewhat tight.

Now hold the U shape in one hand and and pull each cord end a little at a time to cinch up the first knot. The new loop, formed by the U and the knot, determines the length of our zipper pull. If it is too short you can pull on the loop to tighten the knot as well, giving you a little more room to work. A good length is about an inch.

First sinnet knot

Tie the first pass for the sinnet.

You now begin to form the series of knots that will define your zipper pull. We will actually be tying a series of square knots around the two strands of the loop. The result is a nice flat braid that is strong and easy to grip. This braid has various names; Cobra Stitch, Solomon Bar, and Portuguese Sinnet are the ones that I know about.

There is a very important concept in order to get this correctly:

The cord that passes in front of the loop in the last knot tied is the cord that passes in front of the loop again for the next knot.

If you remember this, then this project is easy. The picture shows the first cord for the new knot passing over the top of the loop from the right and going to the left. On your knot it may pass from the left and go to the right depending on how you started. In any case, the startng direction will alternate from side to side as you tie each knot. Just remember to keep the cord that starts in front always passing in front and you will be okay.

I teach this process to youth so that they can make their own survival bracelets. The fact that the knots start from an opposite side each time is difficult for the younger ones to grasp. It is an interesting view into how the brain matures. In my experience, youth who are 9 years and older seem to grasp the concept easier and get less frustrated with the process.

Back to our zipper pull. Look at your last knot that you tied and identify which part crosses over the top of the loop. Find the end of that cord that crossed over the top and pull it down and back over the top of the loop, again leaving a side loop . Pinch this cord in place.

Take the other end of the cord and pull it down and over the cord you are pinching then behind the loop and up through the side loop that you created with the cord you are pinching. It should look like the picture above (it may be reversed depending on which side of knot you started at). Tighten the knot.

More knots for the zipper pull.

Continue adding knots to your zipper pull

Keep adding knots and tightening them as you go. You can also pull down on the loop to compress the knots closer together for a nicer look.

Add knots as long as you have cord or a loop left.

Keep adding knots until you run out of cord or loop.

Continue adding knots until your either run out of enough cord length or you have come down so far on your loop that you cannot add another knot to it.

Clip off the ends of the cord.

Clip off the ends of the cord.

Now remove the excess cord end to a point near your zipper pull. You may use scissors, a knife, or my favorite, some small wire cutters.

Fuse the ends of the cord by melting them with a lighter or a match.

Fuse the ends of the cord by melting them with a lighter or a match. Use some glue for cord that does not melt.

Now melt the ends of the cords close to the zipper pull to keep them from unraveling. If you are using a cord that does not melt, like cotton or hemp, apply a little glue to the ends. Cyanoacrylate (CA) glue, also known as super glue, works well for this step.

Add the lanyard hook to the loop and your zipper pull is done.

Add the lanyard hook to the loop, and your zipper pull is done.

Take one of your lanyard hooks and connect it to the loop of your zipper pull.

Your Zipper Pull is done and ready to be given away.

Your Zipper Pull is done and ready to be given away.

There it is, your zipper pull is done and ready to give away. Once you get the idea down, these zipper pulls are easy to make, cost very little, and really help make a child’s day.

Keep Zipper Pulls on a keychain for each access.

Keep Zipper Pulls on a keychain for easy access.

I keep several zipper pulls on a key ring and toss them into my Cub Master bag. So when I want to hand one out I can just grab the collection, disconnect one pull, and make a spontaneous award.

I do not call these the Zipper Pull award. I give them a name aligned with the organization. It might be the “Bright Y Award,” or the “Cub Master Award,” or the “Way to Go Award.” The name helps define that these little awards are meant to highlight someone who has reflected the values of the organization.

It is funny, but the simple things really do go a long way to building trust and encouraging the youth.

WAS